|
In Stock Standard Design
Toroidal Power Transformers
|
|
We also stock 60 Hz standard design Toroidal Power Transformers
International 50-60Hz Toroidal Power Transformers for Industrial and Commercial Applications Dual Primaries: 2 X 117V, 50/60 Hz (Optional Quad Primaries: 100/117/220/240V ) Power Rating VA P/N Dimensions* Weight* Mounting Hardware Frequency OD. x HT in. mm lbs. kg 26 TN026 50 / 60 Hz 2.6 x 1.4 66 x 36 1.1 0.5 Washer/ pad size: 1 50 TN050 50 / 60 Hz 3.2 x 1.5 81 x 38 1.7 0.8 Washer/ pad size: 2 100 TN100 50 / 60 Hz 3.9 x 1.6 99 x 41 2.4 1.1 Washer/ pad size: 3 150 TN150 50 / 60 Hz 4.3 x 1.7 109 x 43 3.4 1.6 Washer/ pad size: 3 200 TN200 50 / 60 Hz 4.5 x 1.9 114 x 48 4.4 2.0 Washer/ pad size: 4 250 TN250 50 / 60 Hz 4.7 x 2.1 119 x 53 5.4 2.5 Washer/ pad size: 4 300 TN300 50 / 60 Hz 5.0 x 2.3 127 x 59 6.2 2.8 Washer/ pad size: 4 400 TN400 50 / 60 Hz 5.2 x 2.5 132 x 64 7.4 3.4 Washer/ pad size: 5 480 TN480 50 / 60 Hz 5.3 x 2.6 135 x 66 8.1 3.7 Washer/ pad size: 5 500 TN500 50 / 60 Hz 5.4 x 2.8 137 x 71 8.8 4.0 Washer/ pad size: 5 600 TN600 50 / 60 Hz 5.7 x 2.9 145 x 74 10.3 4.7 Epoxy potted center w/ 1/4" hole 750 TN750 50 / 60 Hz 6.3 x 2.8 160 x 74 12.7 5.8 Epoxy potted center w/ 1/4" hole 1000 TN1000 50 / 60 Hz 6.6 x 3.0 168 x 76 15.4 7.0 Epoxy potted center w/ 1/4" hole 1300 TN1300 50 / 60 Hz 7.0 x 3.0 178 x 76 19.0 8.6 Epoxy potted center w/ 1/4" hole 1700 TN1700 50 / 60 Hz 8.0 x 3.0 203 x 76 23.0 10.4 Epoxy potted center w/ 1/4" hole 2300 TN2300 50 / 60 Hz 8.5 x 3.5 216 x 89 29.0 13.2 Epoxy potted center w/ 1/4" hole 3000 TN3000 50 / 60 Hz 9.5 x 3.5 241 x 89 33.0 15.0 Epoxy potted center w/ 1/4" hole 4000 TN4000 50 / 60 Hz 9.8 x 4.0 249 x 102 42.0 19.1 Epoxy potted center w/ 1/4" hole 5500 TN5500 50 / 60 Hz 11.0 x 4.5 279 x 114 62.0 28.1 Epoxy potted center w/ 1/4" hole 7500 TN7500 50 / 60 Hz 13.0 x 5.0 330 x 127 76.0 34.5 Epoxy potted center w/ 1/4" hole 10000 TN10000 50 / 60 Hz 13.5 x 6.0 343 x 152 110.0 49.9 Epoxy potted center w/ 1/4" hole 15000 TN15000 50 / 60 Hz 15.0 x 6.0 381 x 152 150.0 68.0 Epoxy potted center w/ 1/4" hole 20000 TN20000 50 / 60 Hz 16.0 x 6.5 406 x 165 195.0 88.5 Epoxy potted center w/ 1/4" hole 32000 TN32000 50 / 60 Hz Epoxy potted center w/ 1/4" hole
A metal washer and rubber pads provide the most economical way of mounting the transformer horizontally and is adequate for transformers under 600 VA, provided the transformer is not installed in a product that receives rough handling. Above 600 VA, epoxy potted center is standard mounting method. Prices include mounting hardware, either a steel washer and two rubber pads or as shown for larger sizes, an epoxy potted center with one or two drilled mounting hole.* Based on design with dual secondaries. Please call for final dimensions and weight.
Safety Standards:
Our transformers are certified to UL506, CSA C22.2, No. 66-1988, EN61588-1, IEC61558-1, and come with CE marking.
- Optional Potted Center
For a nominal cost you can order smaller transformers with epoxy potting, either with drilled hole or threaded inserts. The potting has a recessed top to accommodate screw head. Flat bottom is standard feature.
·
The L-Bracket
An L-shaped steel bracket is an economical solution for
vertical mounting. A metal washer and two rubber pads are
furnished with each L-bracket.
|
Dimensions in Inches |
|||||
|
Size |
A |
B |
C |
T |
D |
|
1 |
2.00 |
.75 |
.188 |
.04 |
.18 |
|
2 |
2.38 |
.88 |
.188 |
.05 |
.22 |
|
3 |
2.75 |
1.13 |
.25 |
.06 |
.26 |
|
4 |
3.50 |
1.25 |
.25 |
.06 |
.28 |
|
5 |
4.38 |
1.38 |
.31 |
.08 |
.33 |
|
6 |
5.70 |
1.75 |
.31 |
.08 |
.50 |
|
|
|||||
Home | Product Search | Advantages | Design Guide | Design Form
Product Quality | News | Trade Shows | Contact Us |
About Us |
Terms | FAQ | Site Map
"All technical data, prices, terms and conditions are subject to change without prior notice."
Copyright © 2012 -
No part of this site may be copied or reproduced without expressed written consent.