In Stock Standard Design Toroidal
Power Transformers for 117V/60Hz Operation

We also stock 50/60 Hz standard design Toroidal Power Transformers

 

In Stock 60Hz Toroidal Power Transformers for Industrial and Commercial Applications
Power Rating VA	P/N		Dimensions*		Weight*		Mounting Hardware
		Frequency	OD. x HT    in.  mm		lbs.    kg
30	TD030	60Hz	2.6 x 1.4	66 x 36	1.1	0.5	Washer/ pad size: 1
60	TD060	60Hz	3.2 x 1.5	81 x 38	1.7	0.8	Washer/ pad size: 2
120	TD120	60Hz	3.9 x 1.6	99 x 41	2.4	1.1	Washer/ pad size: 3
180	TD180	60Hz	4.3 x 1.7	109 x 43	3.4	1.6	Washer/ pad size: 3
240	TD240	60Hz	4.5 x 1.9	114 x 48	4.4	2.0	Washer/ pad size:  4
300	TD300	60Hz	4.7 x 2.1	119 x 53	5.4	2.5	Washer/ pad size:  4
360	TD360	60Hz	5.0 x 2.3	127 x 59	6.2	2.8	Washer/ pad size:  4
480	TD480	60Hz	5.2 x 2.5	132 x 64	3.4	1.5	Washer/ pad size:  5
575	TD575	60Hz	5.3 x 2.6	135 x 66	3.7	1.7	Washer/ pad size:  5
600	TD600	60Hz	5.4 x 2.8	137 x 71	8.8	4.0	Epoxy potted center w/ 1/4" hole
720	TD720	60Hz	5.7 x 2.9	145 x 74	10.3	4.7	Epoxy potted center w/ 1/4" hole
900	TD900	60Hz	6.3 x 2.8	160 x 71	12.7	5.8	Epoxy potted center w/ 1/4" hole
1200	TD1200	60Hz	6.6 x 3.0	168 x 76	15.4	7.0	Epoxy potted center w/ 1/4" hole
1560	TD1560	60Hz	7.0 x 3.0	178 x 76	19.0	8.6	Epoxy potted center w/ 1/4" hole
2050	TD2050	60Hz	8.0 x 3.0	203 x 76	23.0	10.4	Epoxy potted center w/ 1/4" hole
2360	TD2360	60Hz	8.5 x 3.5	216 x 89	29.0	13.2	Epoxy potted center w/ 1/4" hole
3600	TD3600	60Hz	9.5 x 3.5	241 x 89	33.0	15.0	Epoxy potted center w/ 1/4" hole
4800	TD4800	60Hz	9.8 x 4.0	249 x 102	42.0	19.1	Epoxy potted center w/ 1/4" hole
6600	TD6600	60Hz	11.0 x 4.5	279 x 114	62.0	28.1	Epoxy potted center w/ 1/4" hole
9000	TD9000	60Hz	13.0 x 5.0	330 x 127	76.0	34.5	Epoxy potted center w/ 1/4" hole
12000	TD12000	60Hz	13.5 x 6.0	343 x 152	110.0	49.9	Epoxy potted center w/ 1/4" hole
18000	TD18000	60Hz	15.0 x 6.0	381 x 152	150.0	68.0	Epoxy potted center w/ 1/4" hole
24000	TD24000	60Hz	16.0 x 6.5	406 x 165	195.0	88.5	Epoxy potted center w/ 1/4" hole
40000	TD40000	60Hz					Epoxy potted center w/ 1/4" hole

* Based on design with dual secondaries. Please call for final dimensions and weight.

Safety Standard Certifications:
UL506, CSA C22.2 No.66-1988, EN 61558-1, IEC61558-1, IEC742 and come with CE marking. Intertek File: 3051384

A metal washer and rubber pads provide the most economical way of mounting the transformer horizontally and is adequate for transformers under 600 VA, provided the transformer is not installed in a product that receives rough handling.  Above 600 VA, epoxy potted center is standard mounting method.  Prices include mounting hardware, either a steel washer and two rubber pads or as shown for larger sizes, an epoxy potted center with one or two drilled mounting hole.

• Optional Potted Center

For a nominal cost you can order smaller transformers with epoxy potting, either with drilled hole or threaded inserts. The potting has a recessed top to accommodate screw head. Flat bottom is standard feature.

·         The L-Bracket
An L-shaped steel bracket is an economical solution for vertical mounting. A metal washer and two rubber pads are furnished with each L-bracket.